Difference between revisions of "IProjection"
(→Using iProjection) |
(→Using iProjection) |
||
| Line 27: | Line 27: | ||
#Open iProjection software on laptop. (If it isn't already installed, please feel free to download iProjection) | #Open iProjection software on laptop. (If it isn't already installed, please feel free to download iProjection) | ||
#Choose '''Advanced Connection Mode''', and click box to always use this method. | #Choose '''Advanced Connection Mode''', and click box to always use this method. | ||
| − | #Choose the projector by '''checking the box''' that corresponds to the room you are in and click ''' | + | #Choose the projector by '''checking the box''' that corresponds to the room you are in and click '''Join''' (look for room number) |
#If you want to be sure that nobody takes control of your screen, be sure to select the '''disable interrupt''' checkbox | #If you want to be sure that nobody takes control of your screen, be sure to select the '''disable interrupt''' checkbox | ||
| − | #When done, ''' | + | #When done, click '''Leave''' using the iProjection software, confirm you want to disconnect, and turn projector '''off''' |
Revision as of 11:05, 8 November 2018
iProjection is the successor to EasyMP. EasyMP and iProjection are the mechanisms for wireless projection at 鶹Ƶ.
Contents
Compatibility
iProjection will work with Epson's newest projectors, however they do not support Epson's oldest projectors.
Compatible Projectors
- Epson 1945w (Confer/Vickner/Campus Center/Fine Arts/Olin)
- Epson 5650 (Beck Classrooms)
- Olin 220
- Epson 710Ui (Olin 321)
Not Compatible
- Epson Short Throw 450Wi (Olin 219)
Download iProjection
iProjection can be .
Installing iProjection
- When installing, please choose Standard Installation when prompted. On MacOS computers, you will need to visit the System Preferences and allow an extension to be installed.
Using iProjection
Use this software to wirelessly project your computer via the Epson Projection Software, also known as iProjection. (if using video or sound, please use the wired connection for best results)
- Turn on projector by pressing the On button on the Crestron Panel (white box mounted on wall)
- Choose EasyMP/Network/iProjection/LAN source on Crestron Panel
- Connect laptop to 鶹Ƶ or 鶹ƵSecure
- Open iProjection software on laptop. (If it isn't already installed, please feel free to download iProjection)
- Choose Advanced Connection Mode, and click box to always use this method.
- Choose the projector by checking the box that corresponds to the room you are in and click Join (look for room number)
- If you want to be sure that nobody takes control of your screen, be sure to select the disable interrupt checkbox
- When done, click Leave using the iProjection software, confirm you want to disconnect, and turn projector off