Difference between revisions of "Lund Aerobics Room"
(→Operating the Sound System) |
|||
| Line 1: | Line 1: | ||
==Operating the Sound System== | ==Operating the Sound System== | ||
| − | [[File:AUX.jpg|right|thumb|Figure | + | [[File:Select.jpeg|thumb|right|Figure 1]] |
| − | [[File:CD.jpg|right|thumb|Figure | + | [[File:AUX.jpg|right|thumb|Figure 2]] |
| + | [[File:CD.jpg|right|thumb|Figure 3]] | ||
# Turn the system on by flipping the red switch in the upper right hand corner of the rack. | # Turn the system on by flipping the red switch in the upper right hand corner of the rack. | ||
| − | # Select proper input using input buttons. (Figure | + | # Select proper input using input buttons. (Figure 1) |
| − | #* AUX for iPods/cell phones/computers/etc (Figure | + | #* AUX for iPods/cell phones/computers/etc (Figure 2) |
| − | #* CD for the DVD/VCR player (Figure | + | #* CD for the DVD/VCR player (Figure 3) |
#* TAPE for the tape deck | #* TAPE for the tape deck | ||
# Adjust volume to desired level with the 'VOLUME' knob. '''(OPTIONAL) Adjust microphone volume to a comfortable setting with the 'MIC VOL' knob.''' (Figure 4) | # Adjust volume to desired level with the 'VOLUME' knob. '''(OPTIONAL) Adjust microphone volume to a comfortable setting with the 'MIC VOL' knob.''' (Figure 4) | ||
| − | |||
[[File:Volume.jpeg|thumb|right|Figure 4]] | [[File:Volume.jpeg|thumb|right|Figure 4]] | ||
# Power the system off when finished. (refer to step 1) | # Power the system off when finished. (refer to step 1) | ||
| + | |||
==Troubleshooting== | ==Troubleshooting== | ||
* No sound from speakers: Ensure power is on, check selected the input, if using AUX, check that the device is physically connected. Additionally, you may need to initialize the system when you first turn it on by turning the volume up, and then back down again. | * No sound from speakers: Ensure power is on, check selected the input, if using AUX, check that the device is physically connected. Additionally, you may need to initialize the system when you first turn it on by turning the volume up, and then back down again. | ||
*Feedback from Microphone: mute the headset when approaching the unit. Alternatively, you can adjust either the MIC VOL knob, or the volume knob on the wireless mic unit to achieve desired results. | *Feedback from Microphone: mute the headset when approaching the unit. Alternatively, you can adjust either the MIC VOL knob, or the volume knob on the wireless mic unit to achieve desired results. | ||
Revision as of 15:54, 23 September 2013
Operating the Sound System
- Turn the system on by flipping the red switch in the upper right hand corner of the rack.
- Select proper input using input buttons. (Figure 1)
- AUX for iPods/cell phones/computers/etc (Figure 2)
- CD for the DVD/VCR player (Figure 3)
- TAPE for the tape deck
- Adjust volume to desired level with the 'VOLUME' knob. (OPTIONAL) Adjust microphone volume to a comfortable setting with the 'MIC VOL' knob. (Figure 4)
- Power the system off when finished. (refer to step 1)
Troubleshooting
- No sound from speakers: Ensure power is on, check selected the input, if using AUX, check that the device is physically connected. Additionally, you may need to initialize the system when you first turn it on by turning the volume up, and then back down again.
- Feedback from Microphone: mute the headset when approaching the unit. Alternatively, you can adjust either the MIC VOL knob, or the volume knob on the wireless mic unit to achieve desired results.