Difference between revisions of "HP Laserjet 4000"
 
(9 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
The '''HP Laserjet 4000''' was the old model of the printers in the Residence Halls. In the summer of 2006, they were replaced with the [[HP Laserjet 4250]]
+
[[Image:HP4000.jpg|thumb|A HP LaserJet 4000 Printer, image courtesy of Wikipedia.org|200px|right]]
  
−
==Configuring on your personal computer==
+
The '''HP Laserjet 4000''' was the old model of the printers in the [[residence halls]]. In the summer of 2006, they were replaced with the [[HP Laserjet 4250]], and then again in 2008 with the [[HP Laserjet 4350]], and then again in 2012 with the [[HP Laserjet M602dn]].
  
−
===[[Windows NT]]/[[Windows 2000|2000]]/[[Windows XP|XP]]===
+
==Configuring your computer==
 +
For information on how to set up a printer see the [[Adding a printer - Windows| adding a printer in windows article]] or the [[Adding a printer - Mac OS X| adding a printer in Mac OSX article]].
  
−
Open the [[Printers Control Panel]]: [[Start menu|Start]] > Settings > Printers and double-click on "Add Printer." This will launch the [[Add Printer Wizard]].
+
===Duplexing===
−
 
+
To print on both sides of paper you must enable duplexing by following the instructions [[Duplexing| here]].
−
When asked how the printer is attached to your computer, check the box next to "Local printer," but uncheck "Automatically detect and install my Plug and Play printer."
 
−
 
 
−
You will see a window like the figure below, asking you to select a printer port.
 
−
 
 
−
[[Image:NTXP2000printerdialog.jpg]]
 
−
 
 
−
Check "Create a new port" and select Standard TCP/IP Port in the Type field.
 
−
 
 
−
Click "Next" to launch the [[Add Standard TCP/IP Printer Port Wizard]]. This wizard will ask either for the Printer Name or the IP Address and Port Name.
 
−
 
 
−
 
 
−
 
 
−
===[[Duplexing]]===
 
−
To print on both sides of paper you must enable duplexing by following the instructions below.
 
−
 
 
−
# Open the Printers Control Panel: Start Menu > Settings > Printers.
 
−
# Right-click on your printer and select Properties.
 
−
# On the Device Settings tab look at Installable Options and select "Installed for the Duplex Unit" setting.
 
−
# Click Apply.<br/>[[Image:Printerprefs4.jpg]]
 
−
# On the General Tab, click Printing Preferences.
 
−
# Select Flip on Long Edge.
 
−
# Click Apply.<br/>[[Image:Printerprefs3.jpg]]
 
−
 
 
−
{{stub}}
 
  
 
[[Category:Printers]]
 
[[Category:Printers]]

Latest revision as of 09:54, 6 December 2013

A HP LaserJet 4000 Printer, image courtesy of Wikipedia.org

The HP Laserjet 4000 was the old model of the printers in the residence halls. In the summer of 2006, they were replaced with the HP Laserjet 4250, and then again in 2008 with the HP Laserjet 4350, and then again in 2012 with the HP Laserjet M602dn.

Configuring your computer

For information on how to set up a printer see the adding a printer in windows article or the adding a printer in Mac OSX article.

Duplexing

To print on both sides of paper you must enable duplexing by following the instructions here.

Retrieved from "/gts/w/index.php?title=HP_Laserjet_4000&oldid=27581"